Reinforcing Mesh

This general purpose mesh is used for reinforcing flat concrete elements such as floor slabs and walls.

Square mesh has equal spacing in both directions to form square apertures.

Ribbed Square Mesh to AS4671 – L Class 6.0 metres x 2.4 metres
Product Code	Std Unit	Longitudinal Wires	Cross Wires	Mass kg
SL52	Sheet	10 x 4.77 @ 200 +4 x 4.00 @ 100	30 x 4.77 @ 200	21
SL62	Sheet	10 x 6.00 @ 200 +4 x 4.24 @ 100	30 x 6.00 @ 200	33
SL72	Sheet	10 x 6.75 @ 200 +4 x 4.77 @ 100	30 x 6.75 @ 200	41
SL81	Sheet	25 x 7.60 @ 100	60 x 7.60 @ 100	105
SL82	Sheet	10 x 7.60 @ 200 +4 x 5.37 @ 200	30 x 7.60 @ 200	52
SL92	Sheet	10 x 8.60 @ 200 +4 x 6.00 @ 100	30 x 8.60 @ 200	66
SL102	Sheet	10 x 9.50 @ 200 +4 x 6.75 @ 100	30 x 9.50 @ 200	80
Note: Smaller diameter edge wires on SL meshes may be used if they meet the minimum ductility requirements of the standard and the combined cross-sectional area of the edge wires is equal to or greater than cross-sectional area of the longitudinal wire.

Square Mesh 300 x 300 Spacing – L Class 6.0 metres x 2.3 metres
Product Code	Std Unit	Longitudinal Wires	Cross Wires	Mass kg
SL53	Sheet	6 x 5.00 @ 300	20 x 5.00 @ 300	14
SL63	Sheet	6 x 6.00 @ 300	20 x 6.00 @ 300	21
Note: Mass kg per sheet are a guide only SL52 and SL53 are manufactured in smooth round wire

Rectangular mesh is used for reinforcing thin concrete elements such as floor slabs and walls where more strength is required in one direction than the other.

Rectangular mesh is produced in standard 6m x 2.4m size sheets.

Ribbed Rectangular Mesh to AS4671 – L Class 6.0 metres x 2.4 metres
Product Code	Std Unit	Longitudinal Wires	Cross Wires	Mass kg
RL718	Sheet	25 x 6.75 @ 100	30 x 7.60 @ 200	67
RL818	Sheet	25 x 7.60 @ 100	30 x 7.60 @ 200	79
RL 918	Sheet	25 x 8.60 @ 100	30 x 7.60 @ 200	93
RL1018	Sheet	25 x 9.50 @ 100	30 x 7.60 @ 200	109
RL1118	Sheet	25 X 10.70 @ 100	30 x 7.60 @ 200	130
RL1218	Sheet	25 X 11.90 @ 100	30 x 7.60 @ 200	157